Hurricane H80Commercial flail mower 40-80 HP (30-60 KW) 540 rpm |
|
![]() |
|
|
![]() |
![]() |
![]() |
![]() |
Choice of fine cut, detchatching, reverse "Y" blades, paddle blades or hammer type blades. |
3 Point linkage, cat. 1 & 2 |
Adjustable cutting height roller with scraper |
Rotor support |
Model | HP | Working width | Overall width | Weight lbs | Ship lbs | Rotor rpm | Blades tip speed (ft/min) | # of Blades | Cutting height | # Belts & type |
Driveline 1 3/8" |
H80-072 | 40-80 | 72" | 85" | 1,153 | 1,303 | 1,873 | 8,268 | 80 | 3/4"-6" | 2 CX | ASAE cat. 6 overrunning clutch |
H80-088 | 45-80 | 88" | 99" | 1,296 | 1,446 | 1,873 | 8,268 | 96 | 3/4"-6" | 2 CX | ASAE cat. 6 overrunning clutch |
H80-100 | 50-80 | 100" | 110" | 1,486 | 1,636 | 1,873 | 8,268 | 104 | 3/4"-6" | 2 CX | ASAE cat. 6 overrunning clutch |
WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.
Operator's & Parts Manual H80-072, H80-088, H80-100 serial # 277108 & above
Operator's & Parts Manual H80-072, H80-088, H80-100 serial # 256964 - 277107
Operator's & Parts Manual H80-076, H80-090, H80-100 serial # 256963 & below