Flail Mowers
|
|
|
|
|
![]() |
![]() |
![]() |
Choice of fine cut, detchatching, reverse "Y" blades, paddle blades or hammer type blades. |
Replaceable skids |
Floating top link |
Rotor support |
|
|||
Adjustable cutting height roller with scraper. |
Model | HP | Working width | Overall width | Weight lbs | Ship lbs | Rotor rpm | Blades tip speed (ft/min) | # of Blades | Cutting height | # Belts & type |
Driveline 1 3/8" |
H70-060 | 30-70 | 60" | 71" | 869 | 1,045 | 2,080 | 8,464 | 64 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
H70-072 | 35-70 | 72" | 85" | 955 | 1,145 | 2,080 | 8,464 | 80 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
H70-088 | 40-70 | 88" | 99" | 1078 | 1,298 | 2,080 | 8,464 | 96 | 3/4"-6" | 2 CX | ASAE cat. 4 overrunning clutch |
WARNING: When using a quick hitch on a PTO driven implement, always ensure there is proper overlap prior to use. If there is not the minimum 6" overlap, do not use. Contact your dealer to purchase a longer driveline.
Operator's & Parts Manual H70-060, H70-072, H70-088 serial # 279836 & above
Operator's & Parts Manual H70-060, H70-072, H70-088 serial # 251882 - 279835
Operator's & Parts Manual H70-074, H70-088 serial # 251881 & below